Products
-
- 2" Series, Blue Robotics, Enclosures
- 2″ Acrylic End Cap – Blank
- This end cap is for use on the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ Aluminium End Cap – 2 holes
- This aluminium end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ Aluminium End Cap – Blank
- This aluminium end cap is for use on the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ Dome End Cap
- Dome end cap for use on Watertight Enclosure for ROV/AUV (2″ Series).
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ O-Ring Flange
- This flange has O-ring seals that fit the tube for the 2″ Series Watertight Enclosure. Comes with O-rings.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ O-Ring Spare Set
- A spare set of O-rings for replacement or for use on O-Ring Flange (2″ Series). Contains one face O-ring and two radial O-ring.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ Tube – Acrylic
- This optically clear, cast acrylic tube is for use with the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
- 2″ Tube – Aluminium
- This aluminum tube is for use with the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ Enclosure Clamp Set
- The Enclosure Clamp (3″ Series) clamps around a 3″ Watertight Enclosure for easy mounting on your vehicle.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ End Cap – Aluminium – 4 holes
- This aluminum end cap with 4 holes is for use on the 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ End Cap – Aluminium – 7 holes
- This aluminium end cap with 7 holes is for use on the 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ End Cap – Aluminium – Blank
- This aluminum end cap is for use on the 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ End Cap – Dome
- Dome end cap for use on Watertight Enclosure for ROV/AUV (3″ Series).
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ O-Ring Flange
- This flange with an O-ring seal fits the tube for the 3″ Watertight Enclosure. Comes with O-rings.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ O-Ring Spare Set
- This spare set of O-rings is for replacement or for use on 3″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ Tube – Acrylic – 222mm Length
- This cast acrylic, optically clear tube is for use with 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
- 3″ Tube – Aluminium – 222mm Length
- This aluminium tube for the 3″ Series enclosure has an increased 500m (1,640 ft) depth rating and hard anodized finish.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ Enclosure Clamp
- The Enclosure Clamp (4″ Series) clamps around a 4″ Watertight Enclosure for easy mounting on your vehicle.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ End Cap – Aluminium – 10 holes
- This aluminum end cap with 10 holes is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ End Cap – Aluminium – 14 holes
- This aluminium end cap with 14 holes is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ End Cap – Aluminium – 5 holes
- This aluminium end cap with 5 holes is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ End Cap – Aluminium – Blank
- This aluminium end cap is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ End Cap – Aluminium -18 Holes
- This 18-hole aluminum end cap is compatible with the 4″ Series Watertight Enclosure. It can be used with the BlueROV2 and adds four additional cable penetrations for more expandability!
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ End Cap – Dome
- Dome end cap for use on Watertight Enclosure for ROV/AUV (4″ Series).
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ O-Ring Flange
- This flange has a double O-ring seal that fits the tube for the 4″ Series Water Tight Enclosure. Comes with O-rings.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ O-Ring Spare Set
- A spare set of O-rings for replacement or for use on 4″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ Tube – Acrylic – 298mm Length
- This optically clear, cast acrylic tube for use with the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
- 4″ Tube – Aluminium – 298mm Length
- This aluminium tube for the 4″ Series enclosure has an increased 400m (1,312 ft) depth rating and hard anodized finish.
- Add to Quote
-
- Blueprint Subsea, Diver Navigation
- Artemis PRO System
- ARTEMIS PRO is designed to assist divers navigate underwater or perform seabed surveying and location of objects on the seabed.
- Add to Quote
-
- Blueprint Subsea, Diver Navigation
- Artemis System
- Artemis is a modular handheld console that can be configured as a diver target detection sonar and GPS underwater navigation aid.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
- Bar 30 Depth & Temp Sensor, 300m
- This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. It is waterproof and ready to install.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
- Bar02 Depth & Temp Sensor, 10m, ± 0.16mm
- This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. It is waterproof and ready to install.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
- Bar100 Depth & Temp Sensor, 1000m, ±3cm
- This pressure sensor can measure up to 100 Bar (1000m depth) with a depth resolution of 3 cm. It is waterproof and ready to install
- Add to Quote
-
- Blue Robotics, Electronics, Penetrators & Connectors
- Binder 770 Bulkhead Connector
- This Binder 770 bulkhead connector is our standard for tether connections above the water. This connector can be mounted in a spare hole on the FXTI for your custom connections.
- Add to Quote
-
- Blue Robotics, Electronics, Penetrators & Connectors
- Binder 770 Plug
- This Binder 770 connector is our standard for tether connections above the water. Some assembly with soldering required for installation.
- Add to Quote
-
- Out of Stock
- Blue Robotics, Remotely Operated Vechicles
- BlueROV2
- The BlueROV2 is the world’s most affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s the perfect ROV for inspections, research, and adventuring. What will you see?
- Add to Quote
-
-
- Blue Robotics, Electronics, Sensors
- Camera Analogue PAL – Low Light
- This analog camera has incredible low-light sensitivity, 700 TVL resolution, wide-angle field-of-view, and a standard PAL video output.
- Add to Quote
-
- Blue Robotics, Electronics, Sensors
- Camera HD – USB – Low Light
- This digital HD USB camera has excellent low-light performance, on board compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!
- Add to Quote
-
- Out of Stock
- Blue Robotics, Electronics
- Camera Tilt System
- This camera tilt system provides up/down pitch tilting for a camera and attaches directly to the 4″ Series Electronics Tray. Used on the BlueROV2.
- Add to Quote
-
-
- Blue Robotics, Electronics, Thrusters & Motors
- Electronic Speed Controller (ESC), 30A, R3
- A simple electronic speed controller for the T100 and T200 Thrusters. This new R3 version is based on the BLHeli ESC design with upgraded features and performance!
- Add to Quote
-
- 2" Series, 3" Series, 4" Series, Blue Robotics, Enclosures, Penetrators & Connectors
- Enclosure Vent & Plug
- This vent allows trapped pressure to escape from an enclosure after it has been closed. Based on the cable penetrator design, it includes a threaded plug with double O-ring seal to open and close the vent.
- Add to Quote
-
- Blue Robotics, Electronics
- Fathom S Tether Interface Board – Set
- The Fathom-S boards provide low-latency video, a serial port connection, and remote power on/off switch for tethers of 300+m length. Use with the Fathom tether or a Cat5+ network cable.
- Add to Quote
-
- Blue Robotics, Tether & Reels
- Fathom Spool
- The Fathom Spool is a rugged and easy to use spool that simplifies tether storage and management for your BlueROV2! Full IP67 water resistance, 8-wire slip-ring, and integrated quick connectors make it tough enough to use at almost any dive site while remaining easy to transport. Does not include tether! A Fathom-X Tether Interface (FXTI) topside box is required for use, as well as…
- Add to Quote
-
- Out of Stock
- Blue Robotics, Tether & Reels
- Fathom Tether
- This professional-grade neutrally buoyant tether combines rugged strength and durability with high-performance electrical characteristics for wide-ranging ROV and subsea applications. The new R2 version of the tether has a polyurethane jacket for improved flexibility and better adhesion to potting materials. Comes with pre-installed Binder 770 connector and cable penetrator.
- Add to Quote
-
-
- Blue Robotics, Electronics
- Fathom X Tether Interface Board – Set
- The Fathom-X boards provide a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.
- Add to Quote
-
- Add Ons, Blue Robotics
- GoPro mount
- This 3D printed GoPro mount makes it easy to attach a GoPro or GoPro-compatible camera to your BlueROV2! The mount attaches to the front of the battery enclosure where it has the same view and lighting as the main camera.
- Add to Quote
-
- Blueprint Subsea, Diver Navigation
- GPS Navigator
- The GPS Navigator is a handheld underwater computer designed to assist Search & Rescue, commercial and research divers navigate between pre-determined underwater waypoints and give them access to a GPS based position fix.
- Add to Quote
-
- Blue Robotics, Electronics
- I2C Level Converter
- The I2C Level Converter allows you the run 3.3v logic sensors like the Bar30 or Celsius and other accessories off of a 5v logic device like the Arduino Uno!
- Add to Quote
-
- Impact Subsea, Sensors
- ISA500 Altimeter & Echo Sounder, 4000m
- The ISA500 underwater Altimeter & Echo Sounder provides exceptionally long range measurement capability – in excess of 120 meters. In addition to providing exceptionally long range capability, the unit has a 1mm accuracy – allowing precision underwater distance measurements to be made.
- Add to Quote
-
- Impact Subsea, Sensors
- ISD400 Depth & Temp Sensor, 4000m
- The ISD4000 is a compact, survey grade Depth & Temperature Sensor. Optionally, the unit can also be provided with an integrated Attitude and Heading Reference System (AHRS). This provides highly stable Heading, Pitch and Roll readings.
- Add to Quote
-
- Impact Subsea, Sensors
- ISFMD Flood Member Detector
- The ISFMD system provides the latest in underwater ultrasonic Flooded Member Detection technology. Suitable for Diver or ROV deployment the ISFMD system provides the most advanced and reliable Flooded Member Detection system available today.
- Add to Quote
-
- Impact Subsea, Sensors
- ISM3D AHRS, 4000m
- The ISM3D is a highly accurate underwater Attitude & Heading Reference System.
- Add to Quote
-
- Enclosures, Impact Subsea
- ISP1 Subsea Housing
- Provided with bespoke end caps the ISP1 is ideal for use as an instrumentation housing, control or battery pod.
- Add to Quote
-
- Enclosures, Impact Subsea
- ISP2 Subsea Housing
- ISP2 is ideal for use as an instrumentation housing, control or battery pod.
- Add to Quote
-
- Impact Subsea, Sonars & Trackers
- ISS360 Compact Imaging Sonar
- Impact Subsea is proud to present the most compact imaging sonar in the world - the ISS360.
- Add to Quote
-
- Blue Robotics, Electronics
- Leak Sensor
- The SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur!
- Add to Quote
-
- Blue Robotics, Electronics
- Lithium Battery Charger
- The Lithium Battery Charger is a high power 300W AC/DC balance charger for most battery chemistries, and is perfect for the high capacity Blue Robotics lithium-ion battery!
- Add to Quote
-
- Add Ons, Electronics, Blue Robotics
- Lithium-Ion Battery ( 14.8V, 18Ah )
- The Lithium-ion Battery (14.8V, 18,000Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, and fits perfectly inside a 3″ Watertight Enclosure!
- Add to Quote
-
- Add Ons, Blue Robotics, Lights
- Lumen Subsea Light – Pair
- These are pre-connected (daisy-chained) sets of LumenSubsea Lights, making easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.
- Add to Quote
-
- Add Ons, Blue Robotics, Lights
- Lumen Subsea Light – Quad
- These are pre-connected (daisy-chained) sets of Lumen Subsea Lights, making easy to install four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.
- Add to Quote
-
- Blue Robotics, Lights
- Lumen Subsea Light – Single
- A 1500 lumen subsea LED light with servo signal control, daisy-chain connection for multiple lights, smart over-temp protection, and a 300m depth rating.
- Add to Quote
-
- Blue Robotics, Thrusters & Motors
- M100 Brushless Motor
- The M100 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T100 Thruster.
- Add to Quote
-
- Blue Robotics, Thrusters & Motors
- M200 Brushless Motor
- The M200 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T200 Thruster.
- Add to Quote
-
- Add Ons, Blue Robotics, Manipulators
- Newton Subsea Grabber
- The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.
- Add to Quote
-
- Blueprint Subsea, Sonars & Trackers
- Oculus M1200d Multibeam Sonar
- Offering the highest resolution in the M-series range, the Oculus M1200d operates at both 1.2MHz and 2.1MHz
- Add to Quote
-
- Blueprint Subsea, Sonars & Trackers
- Oculus M370d Multibeam Sonar
- With a 200m range capability, the single-frequency Oculus M370s is a cost effective alternative to traditional mechanically scanned sonars, typically being used for long range navigation and situational awareness.
- Add to Quote
-
- Blueprint Subsea, Sonars & Trackers
- Oculus M750d Multibeam Sonar
- The Oculus M750d is a general purpose dual-frequency sonar offering up to 120 metre range capability at 750kHz, and 40 metre at 1.2MHz
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
- Penetrator 6mm
- This cable penetrator makes a waterproof, high-pressure seal to pass the thruster cable into a water-tight enclosure. Each set includes a bolt, nut, and o-ring. Some assembly required.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
- Penetrator, 8mm
- This cable penetrator makes a waterproof, high-pressure seal to pass the Fathom Tether or other thick cable into a watertight enclosure. Each set includes a bolt, nut, and O-ring. Some assembly required.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
- Penetrator, Blank
- This blank cable penetrator is used to seal any unused holes on your watertight enclosure with a high-pressure seal. Each set includes a bolt, nut, and o-ring.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
- Penetrator, O-Rings, Pk of 10
- This spare set of O-rings is for replacement or for use on our cable penetrators or for our vent bolt. Contains 10 O-rings.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
- Penetrator, Wrench
- Easily and securely tighten cable penetrators in tight quarters with this specially designed wrench!
- Add to Quote
-
- Add Ons, Blue Robotics, Sensors, Sonars & Trackers
- Ping Sonar Altimeter & Echosounder
- The Ping sonar is a single-beam echosounder that measures distances up to 30 meters (100 feet) underwater. A 30 degree beam width, 300 meter (984 foot) depth rating, and and open-source software interface make it a powerful tool for marine robotics.
- Add to Quote
-
- Blueprint Laboratory, Manipulators & Actuators
- Reach 5 Mini
- The Reach 5 Mini is a leap in miniature subsea manipulation technology. It builds on the modularity of the RS1 series to create a highly durable and light weight manipulator, capable of performing dexterous subsea tasks.
- Add to Quote
-
- Blueprint Laboratory, Manipulators & Actuators, Positioners
- RS1-1100 In Line Rotate
- RS1-1100 is a miniature rotate actuator. Capable of continuous rotation it can be used for a variety of tasks including sonar/video scanning and vectoring thrustors. Compliance on the rotate stage can be activated to provide self protection against accidental impact.
- Add to Quote
-
- Blueprint Laboratory, Manipulators & Actuators, Positioners
- RS1-1200 90-Deg Rotate
- RS1-1200 is a miniature bend actuator. Capable of high torque it can be used for a variety of tasks including rotating winches, panning heavy cameras or operating valves. Compliance on the bend stage can be activated to provide self protection against accidental impact.
- Add to Quote
-
- Blueprint Laboratory, Manipulators & Actuators
- RS1-1300 Grabber
- RS1-1300 is a miniature subsea linear actuator. Attached to jaws this device turns into a highly capable grabber, cutter or sampler. When compared the dual function grabber this option is slightly smaller, lighter and available at a lower price point.
- Add to Quote
-
- Blueprint Laboratory, Manipulators & Actuators, Positioners
- RS1-2120 Pan & Tilt
- The combination of our rotate and bend stage creates a highly capable, ultra compact pan tilt actuator RS1-2120. Configured with sonar, camera and/or lights this device allows for exact output orientations or angular sweeps to be demanded making it a useful tool for search and survey operations.
- Add to Quote
-
- Blueprint Laboratory, Manipulators & Actuators
- RS1-2130 Rotating Grabber
- The combination of our rotate and linear stage creates an ultra compact dual function actuator RS1-2130. Configured with jaws this device turns into a highly capable dual function grabber.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS109 Pan & Tilt Device
- The Sidus SS109 underwater pan and tilt assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS109APT Accoustic Pan & Tilt for Imaging Sonars
- SIDUS Solutions SS109APT underwater pan & tilt has been purposely designed and built to meet the demanding requirements for long range imaging sonar applications
- Add to Quote
-
- Positioners, Sidus Solutions
- SS109HT High Performance Pan & Tilt Device
- Sidus Solutions’ SS109HT underwater pan and tilt assembly is a high performance robotic positioning device that improves the versatility and reliability of video inspection systems.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS110 Stainless Steel Pan & Tilt Device
- The Sidus SS110 underwater pan and tilt assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS120 Titanium Pan & Tilt Device
- The Sidus SS120 underwater pan and tilt assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.
- Add to Quote
-
- Lights, Sidus Solutions
- SS172 Sea Torch Light
- Sidus Solutions’ SS172 Sea Torch underwater light offers the perfect illumination solution for a vast number of applications.
- Add to Quote
-
- Lights, Sidus Solutions
- SS174 Stainless Steel Sea Torch Light
- Sidus Solutions’ SS174 Sea Torch underwater light offers the perfect illumination solution for a vast number of applications.
- Add to Quote
-
- Lights, Sidus Solutions
- SS181 Compact High Output LED Light with Dimming
- Sidus Solutions’ SS181 high output LED underwater light offers the perfect illumination solution for a vast number of applications.
- Add to Quote
-
- Lights, Sidus Solutions
- SS182 High Output LED Light with Dimming
- Sidus Solutions’ SS182 high output LED underwater light offers the perfect illumination solution for a vast number of applications were high vibration and impact shock could be an issue or low power consumption is desired.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS250 Heavy Duty Pan & Tilt Device “Deep Blue”
- Sidus Solutions’ SS250 deepwater pan and tilt assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS251 Heavy Duty, Stainless Steel, Pan & Tilt
- Sidus Solutions’ SS251 deepwater pan and tilt assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS252 Heavy Duty, Titanium Pan & Tilt Device
- Sidus Solutions’ SS252 deepwater pan and tilt assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS309 Rotator Device
- The Sidus SS309 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS310 Stainless Steel Rotator
- The Sidus SS310 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS320 Titanium Rotator
- The Sidus SS320 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS350 Heavy Duty Rotator
- SS350 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS351 Heavy Duty, Stainless Steel Rotator
- SS351 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.
- Add to Quote
-
- Positioners, Sidus Solutions
- SS352 heavy Duty, Titanium Rotator
- SS352 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.
- Add to Quote
-
- Cameras, Sidus Solutions
- SS400 Color Camera
- Sidus Solutions’ SS400 is a lightweight and compact camera designed to be noise reductive.
- Add to Quote
-
- Cameras, Sidus Solutions
- SS401 Miniature Color Zoom Camera with Remote Control
- Sidus Solutions’ SS401 color cameras are lightweight, robust inspection tools designed as low cost alternatives to other models on the market today.
- Add to Quote
-
- Cameras, Sidus Solutions
- SS402 Compact Color High Resolution Deep Sea Camera
- Sidus Solutions’ SS402 is a robust inspection tool designed for harsh deep sea conditions
- Add to Quote
