BlueROV Parts 

2″ Acrylic End Cap – Blank

This end cap is for use on the 2″ Series Watertight Enclosure.

2″ Aluminium End Cap – 2 holes

This aluminium end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.

2″ Aluminium End Cap – Blank

This aluminium end cap is for use on the 2″ Series Watertight Enclosure.

2″ Dome End Cap

Dome end cap for use on Watertight Enclosure for ROV/AUV (2″ Series).

2″ O-Ring Flange

This flange has O-ring seals that fit the tube for the 2″ Series Watertight Enclosure. Comes with O-rings.

2″ O-Ring Spare Set

A spare set of O-rings for replacement or for use on O-Ring Flange (2″ Series). Contains one face O-ring and two radial O-ring.

2″ Tube – Acrylic

This optically clear, cast acrylic tube is for use with the 2″ Series Watertight Enclosure.

2″ Tube – Aluminium

This aluminum tube is for use with the 2″ Series Watertight Enclosure.

3″ Enclosure Clamp Set

The Enclosure Clamp (3″ Series) clamps around a 3″ Watertight Enclosure for easy mounting on your vehicle.

3″ End Cap – Aluminium – 4 holes

This aluminum end cap with 4 holes is for use on the 3″ Series Watertight Enclosure.

3″ End Cap – Aluminium – 7 holes

This aluminium end cap with 7 holes is for use on the 3″ Series Watertight Enclosure.

3″ End Cap – Aluminium – Blank

This aluminum end cap is for use on the 3″ Series Watertight Enclosure.

3″ End Cap – Dome

Dome end cap for use on Watertight Enclosure for ROV/AUV (3″ Series).

3″ O-Ring Flange

This flange with an O-ring seal fits the tube for the 3″ Watertight Enclosure. Comes with O-rings.

3″ O-Ring Spare Set

This spare set of O-rings is for replacement or for use on 3″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

3″ Tube – Acrylic – 222mm Length

This cast acrylic, optically clear tube is for use with 3″ Series Watertight Enclosure.

3″ Tube – Aluminium – 222mm Length

This aluminium tube for the 3″ Series enclosure has an increased 500m (1,640 ft) depth rating and hard anodized finish.

4″ Enclosure Clamp

The Enclosure Clamp (4″ Series) clamps around a 4″ Watertight Enclosure for easy mounting on your vehicle.

4″ End Cap – Aluminium – 10 holes

This aluminum end cap with 10 holes is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium – 14 holes

This aluminium end cap with 14 holes is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium – 5 holes

This aluminium end cap with 5 holes is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium – Blank

This aluminium end cap is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium -18 Holes

This 18-hole aluminum end cap is compatible with the 4″ Series Watertight Enclosure. It can be used with the BlueROV2 and adds four additional cable penetrations for more expandability!

4″ End Cap – Dome

Dome end cap for use on Watertight Enclosure for ROV/AUV (4″ Series).

4″ O-Ring Flange

This flange has a double O-ring seal that fits the tube for the 4″ Series Water Tight Enclosure. Comes with O-rings.

4″ O-Ring Spare Set

A spare set of O-rings for replacement or for use on 4″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

4″ Tube – Acrylic – 298mm Length

This optically clear, cast acrylic tube for use with the 4″ Series Watertight Enclosure.

4″ Tube – Aluminium – 298mm Length

This aluminium tube for the 4″ Series enclosure has an increased 400m (1,312 ft) depth rating and hard anodized finish.

Binder 770 Bulkhead Connector

This Binder 770 bulkhead connector is our standard for tether connections above the water. This connector can be mounted in a spare hole on the FXTI for your custom connections.

Binder 770 Plug

This Binder 770 connector is our standard for tether connections above the water. Some assembly with soldering required for installation.

Camera Analogue PAL – Low Light

This analog camera has incredible low-light sensitivity, 700 TVL resolution, wide-angle field-of-view, and a standard PAL video output.

Camera HD – USB – Low Light

This digital HD USB camera has excellent low-light performance, on board compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!

Camera Tilt System

This camera tilt system provides up/down pitch tilting for a camera and attaches directly to the 4″ Series Electronics Tray. Used on the BlueROV2.

Electronic Speed Controller (ESC), 30A, R3

A simple electronic speed controller for the T100 and T200 Thrusters. This new R3 version is based on the BLHeli ESC design with upgraded features and performance!

Enclosure Vent & Plug

This vent allows trapped pressure to escape from an enclosure after it has been closed. Based on the cable penetrator design, it includes a threaded plug with double O-ring seal to open and close the vent.

Fathom S Tether Interface Board – Set

The Fathom-S boards provide low-latency video, a serial port connection, and remote power on/off switch for tethers of 300+m length. Use with the Fathom tether or a Cat5+ network cable.

Fathom X Tether Interface Board – Set

The Fathom-X boards provide a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.

I2C Level Converter

The I2C Level Converter allows you the run 3.3v logic sensors like the Bar30 or Celsius and other accessories off of a 5v logic device like the Arduino Uno!

ISP1 Subsea Housing

Provided with bespoke end caps the ISP1 is ideal for use as an instrumentation housing, control or battery pod.

ISP2 Subsea Housing

ISP2 is ideal for use as an instrumentation housing, control or battery pod.

Leak Sensor

The SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur!

Lithium Battery Charger

The Lithium Battery Charger is a high power 300W AC/DC balance charger for most battery chemistries, and is perfect for the high capacity Blue Robotics lithium-ion battery!

Lithium-Ion Battery ( 14.8V, 18Ah )

The Lithium-ion Battery (14.8V, 18,000Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, and fits perfectly inside a 3″ Watertight Enclosure!

Subsea LED Indicator

This Subsea LED Indicator light comes in four colors and provides a high pressure on/off or status indicator light.

Subsea Switch

This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.

Thruster Commander

The Thruster Commander makes it easy to get started with our thrusters and speed controllers. It comes with a control unit, potentiometers, knobs, cables, and terminal blocks to get thrusting quickly!

Vacuum Plug

Test the watertight seal on your enclosure with this vacuum plug attachment, which connects to a hand vacuum pump and inserts into the enclosure vent. Comes with O-rings and a rubber stopper for testing.

Water Detect Probes

These extra probes for your SOS Leak Sensor let you get to those hard to reach places in your watertight enclosure! You can choose from extra 6″, 12″ or 6″ four headed probes for you leak detection setup.