Exploration drives innovation.
Blue Robotics makes the BlueROV2 underwater vehicle and components and parts for marine robotics including thrusters, watertight enclosures, and more!
Blue Robotics
-
- Out of Stock
- Blue Robotics, Remotely Operated Vechicles
BlueROV2
- The BlueROV2 is the world’s most affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s the perfect ROV for inspections, research, and adventuring. What will you see?
- Add to Quote
-
BlueROV2 is the world’s most affordable high-performance ROV
-
- 2" Series, Blue Robotics, Enclosures
2″ Acrylic End Cap – Blank
- This end cap is for use on the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ Aluminium End Cap – 2 holes
- This aluminium end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ Aluminium End Cap – Blank
- This aluminium end cap is for use on the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ Dome End Cap
- Dome end cap for use on Watertight Enclosure for ROV/AUV (2″ Series).
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ O-Ring Flange
- This flange has O-ring seals that fit the tube for the 2″ Series Watertight Enclosure. Comes with O-rings.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ O-Ring Spare Set
- A spare set of O-rings for replacement or for use on O-Ring Flange (2″ Series). Contains one face O-ring and two radial O-ring.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ Tube – Acrylic
- This optically clear, cast acrylic tube is for use with the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 2" Series, Blue Robotics, Enclosures
2″ Tube – Aluminium
- This aluminum tube is for use with the 2″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ Enclosure Clamp Set
- The Enclosure Clamp (3″ Series) clamps around a 3″ Watertight Enclosure for easy mounting on your vehicle.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ End Cap – Aluminium – 4 holes
- This aluminum end cap with 4 holes is for use on the 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ End Cap – Aluminium – 7 holes
- This aluminium end cap with 7 holes is for use on the 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ End Cap – Aluminium – Blank
- This aluminum end cap is for use on the 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ End Cap – Dome
- Dome end cap for use on Watertight Enclosure for ROV/AUV (3″ Series).
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ O-Ring Flange
- This flange with an O-ring seal fits the tube for the 3″ Watertight Enclosure. Comes with O-rings.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ O-Ring Spare Set
- This spare set of O-rings is for replacement or for use on 3″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ Tube – Acrylic – 222mm Length
- This cast acrylic, optically clear tube is for use with 3″ Series Watertight Enclosure.
- Add to Quote
-
- 3" Series, Blue Robotics, Enclosures
3″ Tube – Aluminium – 222mm Length
- This aluminium tube for the 3″ Series enclosure has an increased 500m (1,640 ft) depth rating and hard anodized finish.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ Enclosure Clamp
- The Enclosure Clamp (4″ Series) clamps around a 4″ Watertight Enclosure for easy mounting on your vehicle.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ End Cap – Aluminium – 10 holes
- This aluminum end cap with 10 holes is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ End Cap – Aluminium – 14 holes
- This aluminium end cap with 14 holes is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ End Cap – Aluminium – 5 holes
- This aluminium end cap with 5 holes is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ End Cap – Aluminium – Blank
- This aluminium end cap is for use on the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ End Cap – Aluminium -18 Holes
- This 18-hole aluminum end cap is compatible with the 4″ Series Watertight Enclosure. It can be used with the BlueROV2 and adds four additional cable penetrations for more expandability!
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ End Cap – Dome
- Dome end cap for use on Watertight Enclosure for ROV/AUV (4″ Series).
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ O-Ring Flange
- This flange has a double O-ring seal that fits the tube for the 4″ Series Water Tight Enclosure. Comes with O-rings.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ O-Ring Spare Set
- A spare set of O-rings for replacement or for use on 4″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ Tube – Acrylic – 298mm Length
- This optically clear, cast acrylic tube for use with the 4″ Series Watertight Enclosure.
- Add to Quote
-
- 4" Series, Blue Robotics, Enclosures
4″ Tube – Aluminium – 298mm Length
- This aluminium tube for the 4″ Series enclosure has an increased 400m (1,312 ft) depth rating and hard anodized finish.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
Bar 30 Depth & Temp Sensor, 300m
- This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. It is waterproof and ready to install.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
Bar02 Depth & Temp Sensor, 10m, ± 0.16mm
- This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. It is waterproof and ready to install.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
Bar100 Depth & Temp Sensor, 1000m, ±3cm
- This pressure sensor can measure up to 100 Bar (1000m depth) with a depth resolution of 3 cm. It is waterproof and ready to install
- Add to Quote
-
- Blue Robotics, Electronics, Penetrators & Connectors
Binder 770 Bulkhead Connector
- This Binder 770 bulkhead connector is our standard for tether connections above the water. This connector can be mounted in a spare hole on the FXTI for your custom connections.
- Add to Quote
-
- Blue Robotics, Electronics, Penetrators & Connectors
Binder 770 Plug
- This Binder 770 connector is our standard for tether connections above the water. Some assembly with soldering required for installation.
- Add to Quote
-
- Out of Stock
- Blue Robotics, Remotely Operated Vechicles
BlueROV2
- The BlueROV2 is the world’s most affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s the perfect ROV for inspections, research, and adventuring. What will you see?
- Add to Quote
-
-
- Blue Robotics, Electronics, Sensors
Camera Analogue PAL – Low Light
- This analog camera has incredible low-light sensitivity, 700 TVL resolution, wide-angle field-of-view, and a standard PAL video output.
- Add to Quote
-
- Blue Robotics, Electronics, Sensors
Camera HD – USB – Low Light
- This digital HD USB camera has excellent low-light performance, on board compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!
- Add to Quote
-
- Out of Stock
- Blue Robotics, Electronics
Camera Tilt System
- This camera tilt system provides up/down pitch tilting for a camera and attaches directly to the 4″ Series Electronics Tray. Used on the BlueROV2.
- Add to Quote
-
-
- Blue Robotics, Electronics, Thrusters & Motors
Electronic Speed Controller (ESC), 30A, R3
- A simple electronic speed controller for the T100 and T200 Thrusters. This new R3 version is based on the BLHeli ESC design with upgraded features and performance!
- Add to Quote
-
- 2" Series, 3" Series, 4" Series, Blue Robotics, Enclosures, Penetrators & Connectors
Enclosure Vent & Plug
- This vent allows trapped pressure to escape from an enclosure after it has been closed. Based on the cable penetrator design, it includes a threaded plug with double O-ring seal to open and close the vent.
- Add to Quote
-
- Blue Robotics, Electronics
Fathom S Tether Interface Board – Set
- The Fathom-S boards provide low-latency video, a serial port connection, and remote power on/off switch for tethers of 300+m length. Use with the Fathom tether or a Cat5+ network cable.
- Add to Quote
-
- Blue Robotics, Tether & Reels
Fathom Spool
- The Fathom Spool is a rugged and easy to use spool that simplifies tether storage and management for your BlueROV2! Full IP67 water resistance, 8-wire slip-ring, and integrated quick connectors make it tough enough to use at almost any dive site while remaining easy to transport. Does not include tether! A Fathom-X Tether Interface (FXTI) topside box is required for use, as well as…
- Add to Quote
-
- Out of Stock
- Blue Robotics, Tether & Reels
Fathom Tether
- This professional-grade neutrally buoyant tether combines rugged strength and durability with high-performance electrical characteristics for wide-ranging ROV and subsea applications. The new R2 version of the tether has a polyurethane jacket for improved flexibility and better adhesion to potting materials. Comes with pre-installed Binder 770 connector and cable penetrator.
- Add to Quote
-
-
- Blue Robotics, Electronics
Fathom X Tether Interface Board – Set
- The Fathom-X boards provide a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.
- Add to Quote
-
- Add Ons, Blue Robotics
GoPro mount
- This 3D printed GoPro mount makes it easy to attach a GoPro or GoPro-compatible camera to your BlueROV2! The mount attaches to the front of the battery enclosure where it has the same view and lighting as the main camera.
- Add to Quote
-
- Blue Robotics, Electronics
I2C Level Converter
- The I2C Level Converter allows you the run 3.3v logic sensors like the Bar30 or Celsius and other accessories off of a 5v logic device like the Arduino Uno!
- Add to Quote
-
- Blue Robotics, Electronics
Leak Sensor
- The SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur!
- Add to Quote
-
- Blue Robotics, Electronics
Lithium Battery Charger
- The Lithium Battery Charger is a high power 300W AC/DC balance charger for most battery chemistries, and is perfect for the high capacity Blue Robotics lithium-ion battery!
- Add to Quote
-
- Add Ons, Blue Robotics, Electronics
Lithium-Ion Battery ( 14.8V, 18Ah )
- The Lithium-ion Battery (14.8V, 18,000Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, and fits perfectly inside a 3″ Watertight Enclosure!
- Add to Quote
-
- Add Ons, Blue Robotics, Lights
Lumen Subsea Light – Pair
- These are pre-connected (daisy-chained) sets of LumenSubsea Lights, making easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.
- Add to Quote
-
- Add Ons, Blue Robotics, Lights
Lumen Subsea Light – Quad
- These are pre-connected (daisy-chained) sets of Lumen Subsea Lights, making easy to install four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.
- Add to Quote
-
- Blue Robotics, Lights
Lumen Subsea Light – Single
- A 1500 lumen subsea LED light with servo signal control, daisy-chain connection for multiple lights, smart over-temp protection, and a 300m depth rating.
- Add to Quote
-
- Blue Robotics, Thrusters & Motors
M100 Brushless Motor
- The M100 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T100 Thruster.
- Add to Quote
-
- Blue Robotics, Thrusters & Motors
M200 Brushless Motor
- The M200 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T200 Thruster.
- Add to Quote
-
- Add Ons, Blue Robotics, Manipulators
Newton Subsea Grabber
- The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
Penetrator 6mm
- This cable penetrator makes a waterproof, high-pressure seal to pass the thruster cable into a water-tight enclosure. Each set includes a bolt, nut, and o-ring. Some assembly required.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
Penetrator, 8mm
- This cable penetrator makes a waterproof, high-pressure seal to pass the Fathom Tether or other thick cable into a watertight enclosure. Each set includes a bolt, nut, and O-ring. Some assembly required.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
Penetrator, Blank
- This blank cable penetrator is used to seal any unused holes on your watertight enclosure with a high-pressure seal. Each set includes a bolt, nut, and o-ring.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
Penetrator, O-Rings, Pk of 10
- This spare set of O-rings is for replacement or for use on our cable penetrators or for our vent bolt. Contains 10 O-rings.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors
Penetrator, Wrench
- Easily and securely tighten cable penetrators in tight quarters with this specially designed wrench!
- Add to Quote
-
- Add Ons, Blue Robotics, Sensors, Sonars & Trackers
Ping Sonar Altimeter & Echosounder
- The Ping sonar is a single-beam echosounder that measures distances up to 30 meters (100 feet) underwater. A 30 degree beam width, 300 meter (984 foot) depth rating, and and open-source software interface make it a powerful tool for marine robotics.
- Add to Quote
-
- Out of Stock
- Blue Robotics, Electronics
Subsea LED Indicator
- This Subsea LED Indicator light comes in four colors and provides a high pressure on/off or status indicator light.
- Add to Quote
-
-
- Blue Robotics, Electronics
Subsea Switch
- This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.
- Add to Quote
-
- Blue Robotics, Thrusters & Motors
T100 / T200 Thruster Nozzle
- This replacement nozzle will work for the T100 and T200. Comes with four replacement screws.
- Add to Quote
-
- Out of Stock
- Blue Robotics, Thrusters & Motors
T100 Propeller Set
- A set of spare T100 propellers for replacement or for use on the M100 Motor. Contains one clockwise propeller and one counter-clockwise propeller.
- Add to Quote
-
-
- Blue Robotics, Thrusters & Motors
T100 Thruster
- The T100 is world’s first affordable underwater thruster designed for marine robotics and the future of ocean exploration.
- Add to Quote
-
- Out of Stock
- Blue Robotics, Thrusters & Motors
T200 Propeller Set
- A set of spare T200 propellers for replacement or for use on the M200 Motor. Contains one clockwise propeller and one counter-clockwise propeller.
- Add to Quote
-
-
- Thrusters & Motors, Blue Robotics
T200 Thruster
- The T200 is a more powerful version of the T100 Thruster. Great for powering larger ROVs, AUVs, and surface vessels.
- Add to Quote
-
- Blue Robotics, Penetrators & Connectors, Sensors
Temperature Sensor, ±0.1ºC
- This high-accuracy, fast-response temperature sensor comes sealed and ready to use for temperature profiling, lab measurements, and more!
- Add to Quote
-
- Blue Robotics, Electronics, Thrusters & Motors
Thruster Commander
- The Thruster Commander makes it easy to get started with our thrusters and speed controllers. It comes with a control unit, potentiometers, knobs, cables, and terminal blocks to get thrusting quickly!
- Add to Quote
-
- Blue Robotics, Thrusters & Motors
Thruster Mounting Bracket
- Enables more versatile mounting options for the T100 and T200 Thrusters.
- Add to Quote
-
- 2" Series, 3" Series, 4" Series, Blue Robotics, Enclosures
Vacuum Plug
- Test the watertight seal on your enclosure with this vacuum plug attachment, which connects to a hand vacuum pump and inserts into the enclosure vent. Comes with O-rings and a rubber stopper for testing.
- Add to Quote
-
- Out of Stock
- Blue Robotics, Electronics
Water Detect Probes
- These extra probes for your SOS Leak Sensor let you get to those hard to reach places in your watertight enclosure! You can choose from extra 6″, 12″ or 6″ four headed probes for you leak detection setup.
- Add to Quote
-
