Products 

This end cap is for use on the 2″ Series Watertight Enclosure.

This aluminium end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.

This aluminium end cap is for use on the 2″ Series Watertight Enclosure.

Dome end cap for use on Watertight Enclosure for ROV/AUV (2″ Series).

This flange has O-ring seals that fit the tube for the 2″ Series Watertight Enclosure. Comes with O-rings.

A spare set of O-rings for replacement or for use on O-Ring Flange (2″ Series). Contains one face O-ring and two radial O-ring.

This optically clear, cast acrylic tube is for use with the 2″ Series Watertight Enclosure.

This aluminum tube is for use with the 2″ Series Watertight Enclosure.

The Enclosure Clamp (3″ Series) clamps around a 3″ Watertight Enclosure for easy mounting on your vehicle.

This aluminum end cap with 4 holes is for use on the 3″ Series Watertight Enclosure.

This aluminium end cap with 7 holes is for use on the 3″ Series Watertight Enclosure.

This aluminum end cap is for use on the 3″ Series Watertight Enclosure.

Dome end cap for use on Watertight Enclosure for ROV/AUV (3″ Series).

This flange with an O-ring seal fits the tube for the 3″ Watertight Enclosure. Comes with O-rings.

This spare set of O-rings is for replacement or for use on 3″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

This cast acrylic, optically clear tube is for use with 3″ Series Watertight Enclosure.

This aluminium tube for the 3″ Series enclosure has an increased 500m (1,640 ft) depth rating and hard anodized finish.

The Enclosure Clamp (4″ Series) clamps around a 4″ Watertight Enclosure for easy mounting on your vehicle.

This aluminum end cap with 10 holes is for use on the 4″ Series Watertight Enclosure.

This aluminium end cap with 14 holes is for use on the 4″ Series Watertight Enclosure.

This aluminium end cap with 5 holes is for use on the 4″ Series Watertight Enclosure.

This aluminium end cap is for use on the 4″ Series Watertight Enclosure.

This 18-hole aluminum end cap is compatible with the 4″ Series Watertight Enclosure. It can be used with the BlueROV2 and adds four additional cable penetrations for more expandability!

Dome end cap for use on Watertight Enclosure for ROV/AUV (4″ Series).

This flange has a double O-ring seal that fits the tube for the 4″ Series Water Tight Enclosure. Comes with O-rings.

A spare set of O-rings for replacement or for use on 4″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

This optically clear, cast acrylic tube for use with the 4″ Series Watertight Enclosure.

This aluminium tube for the 4″ Series enclosure has an increased 400m (1,312 ft) depth rating and hard anodized finish.

ARTEMIS PRO is designed to assist divers navigate underwater or perform seabed surveying and location of objects on the seabed.

Artemis is a modular handheld console that can be configured as a diver target detection sonar and GPS underwater navigation aid.  

This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. It is waterproof and ready to install.

This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. It is waterproof and ready to install.

This pressure sensor can measure up to 100 Bar (1000m depth) with a depth resolution of 3 cm. It is waterproof and ready to install

The Bay Dynamics BD3 takes the BlueRobotics architecture and extends it to the next evolution. Our years of experience have allowed us to identify key areas which will increase reliability, flexibility and ease of use for you, the end user.

This Binder 770 bulkhead connector is our standard for tether connections above the water. This connector can be mounted in a spare hole on the FXTI for your custom connections.

This Binder 770 connector is our standard for tether connections above the water. Some assembly with soldering required for installation.

We’ve taken the best of the...

The BlueROV2 is the world’s most affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s the perfect ROV for inspections, research, and adventuring. What will you see?

This analog camera has incredible low-light sensitivity, 700 TVL resolution, wide-angle field-of-view, and a standard PAL video output.

This digital HD USB camera has excellent low-light performance, on board compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!

This camera tilt system provides up/down pitch tilting for a camera and attaches directly to the 4″ Series Electronics Tray. Used on the BlueROV2.

A simple electronic speed controller for the T100 and T200 Thrusters. This new R3 version is based on the BLHeli ESC design with upgraded features and performance!

This vent allows trapped pressure to escape from an enclosure after it has been closed. Based on the cable penetrator design, it includes a threaded plug with double O-ring seal to open and close the vent.

The Fathom-S boards provide low-latency video, a serial port connection, and remote power on/off switch for tethers of 300+m length. Use with the Fathom tether or a Cat5+ network cable.

The Fathom Spool is a rugged and easy to use spool that simplifies tether storage and management for your BlueROV2! Full IP67 water resistance, 8-wire slip-ring, and integrated quick connectors make it tough enough to use at almost any dive site while remaining easy to transport. Does not include tether! A Fathom-X Tether Interface (FXTI) topside box is required for use, as well as a tether with an installed Binder 770 connector.

This professional-grade neutrally buoyant tether combines rugged strength and durability with high-performance electrical characteristics for wide-ranging ROV and subsea applications. The new R2 version of the tether has a polyurethane jacket for improved flexibility and better adhesion to potting materials. Comes with pre-installed Binder 770 connector and cable penetrator.

The Fathom-X boards provide a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.

This 3D printed GoPro mount makes it easy to attach a GoPro or GoPro-compatible camera to your BlueROV2! The mount attaches to the front of the battery enclosure where it has the same view and lighting as the main camera.

The GPS Navigator is a handheld underwater computer designed to assist Search & Rescue, commercial and research divers navigate between pre-determined underwater waypoints and give them access to a GPS based position fix.

The I²C Level Converter allows you the run 3.3v logic sensors like the Bar30 or Celsius and other accessories off of a 5v logic device like the Arduino Uno!

The ISA500 underwater Altimeter & Echo Sounder provides exceptionally long range measurement capability – in excess of 120 meters.  In addition to providing exceptionally long range capability, the unit has a 1mm accuracy – allowing precision underwater distance measurements to be made.  

The ISD4000 is a compact, survey grade Depth & Temperature Sensor. Optionally, the unit can also be provided with an integrated Attitude and Heading Reference System (AHRS).  This provides highly stable Heading, Pitch and Roll readings.

The ISFMD system provides the latest in underwater ultrasonic Flooded Member Detection technology. Suitable for Diver or ROV deployment the ISFMD system provides the most advanced and reliable Flooded Member Detection system available today.

The ISM3D is a highly accurate underwater Attitude & Heading Reference System.  

Provided with bespoke end caps the ISP1 is ideal for use as an instrumentation housing, control or battery pod.

ISP2 is ideal for use as an instrumentation housing, control or battery pod.

Impact Subsea is proud to present the most compact imaging sonar in the world - the ISS360.

The SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur!

The Lithium Battery Charger is a high power 300W AC/DC balance charger for most battery chemistries, and is perfect for the high capacity Blue Robotics lithium-ion battery!

The Lithium-ion Battery (14.8V, 18,000Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, and fits perfectly inside a 3″ Watertight Enclosure!

These are pre-connected (daisy-chained) sets of Lumen Subsea Lights, making easy to install four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.

A 1500 lumen subsea LED light with servo signal control, daisy-chain connection for multiple lights, smart over-temp protection, and a 300m depth rating.

The M100 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T100 Thruster.

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.

Offering the highest resolution in the M-series range, the Oculus M1200d operates at both 1.2MHz and 2.1MHz

With a 200m range capability, the single-frequency Oculus M370s is a cost effective alternative to traditional mechanically scanned sonars, typically being used for long range navigation and situational awareness.

The Oculus M750d is a general purpose dual-frequency sonar offering up to 120 metre range capability at 750kHz, and 40 metre at 1.2MHz

This cable penetrator makes a waterproof, high-pressure seal to pass the Fathom Tether or other thick cable into a watertight enclosure. Each set includes a bolt, nut, and O-ring. Some assembly required.

This blank cable penetrator is used to seal any unused holes on your watertight enclosure with a high-pressure seal. Each set includes a bolt, nut, and o-ring.

The Ping sonar is a single-beam echosounder that measures distances up to 30 meters (100 feet) underwater. A 30 degree beam width, 300 meter (984 foot) depth rating, and and open-source software interface make it a powerful tool for marine robotics.

The Qysea Fifish V6 is a great low cost ROV for monitoring.

The Reach 5 Mini is a leap in miniature subsea manipulation technology. It builds on the modularity of the RS1 series to create a highly durable and light weight manipulator, capable of performing dexterous subsea tasks.

RS1-1100 is a miniature rotate actuator. Capable of continuous rotation it can be used for a variety of tasks including sonar/video scanning and vectoring thrustors. Compliance on the rotate stage can be activated to provide self protection against accidental impact.

RS1-1200 is a miniature bend actuator. Capable of high torque it can be used for a variety of tasks including rotating winches, panning heavy cameras or operating valves. Compliance on the bend stage can be activated to provide self protection against accidental impact.

RS1-1300 is a miniature subsea linear actuator. Attached to jaws this device turns into a highly capable grabber, cutter or sampler. When compared the dual function grabber this option is slightly smaller, lighter and available at a lower price point.

The combination of our rotate and bend stage creates a highly capable, ultra compact pan tilt actuator RS1-2120. Configured with sonar, camera and/or lights this device allows for exact output orientations or angular sweeps to be demanded making it a useful tool for search and survey operations.

The combination of our rotate and linear stage creates an ultra compact dual function actuator RS1-2130. Configured with jaws this device turns into a highly capable dual function grabber.

The Sidus SS109 underwater pan and tilt assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

SIDUS Solutions SS109APT underwater pan & tilt has been purposely designed and built to meet the demanding requirements for long range imaging sonar applications

Sidus Solutions’ SS109HT underwater pan and tilt assembly is a high performance robotic positioning device that improves the versatility and reliability of video inspection systems.

The Sidus SS110 underwater pan and tilt assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

The Sidus SS120 underwater pan and tilt assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

Sidus Solutions’ SS172 Sea Torch underwater light offers the perfect illumination solution for a vast number of applications.

Sidus Solutions’ SS174 Sea Torch underwater light offers the perfect illumination solution for a vast number of applications.

Sidus Solutions’ SS181 high output LED underwater light offers the perfect illumination solution for a vast number of applications.

Sidus Solutions’ SS182 high output LED underwater light offers the perfect illumination solution for a vast number of applications were high vibration and impact shock could be an issue or low power consumption is desired.

Sidus Solutions’ SS250 deepwater pan and tilt assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

Sidus Solutions’ SS251 deepwater pan and tilt assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

Sidus Solutions’ SS252 deepwater pan and tilt assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

The Sidus SS309 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

The Sidus SS310 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

The Sidus SS320 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

SS350 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

SS351 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

SS352 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

Sidus Solutions’ SS400 is a lightweight and compact camera designed to be noise reductive.

Sidus Solutions’ SS401 color cameras are lightweight, robust inspection tools designed as low cost alternatives to other models on the market today.

Sidus Solutions’ SS402 is a robust inspection tool designed for harsh deep sea conditions

Sidus Solutions’ SS403 low light camera is a lightweight and compact camera designed for harsh low light conditions.

Sidus Solutions’ SS408 B&W cameras are lightweight and robust inspection tools.

SIDUS Solutions’ Mini Inspector unites an image rich, high clarity inspection camera with integrated, variable intensity, sealed high-bright LEDs.

Sidus Solutions’ SS420 is the perfect solution for underwater video requirements up to a depth of 10,000 feet with a x36 zoom.

SIDUS Solutions’ SS422 At the heart of this powerful tool is a 470 TVL color camera module encompassing a 36x optical zoom lens, 12x digital zoom (432x combined) and a 1/4 in EXview HAD CCD imaging sensor.

Sidus Solutions’ SS429-DN is a network ready IP camera system with a 1/2” CMOS sensor. Resolution options include 2, 3 and 5 megapixel versions.

Sidus Solutions’ SS446 offers stunning full 1080i/720p high definition video via HD-SDI over coaxial cable.

The SS465 IP Color Camera with clear optical zoom ensures high resolution images, installation ease and immediate data storage & retrieval.

The SS474 provides exceptional image quality at HD 1080p resolution. Rated to 6000m.

The SS490 is a 4K UHD camera that provides superior video image quality at four times the resolution of 1080 full HD images.

Sidus Solutions’ SS501 is a deep water pointing and scaling device that utilizes a powerful 532nm green laser.

StarFish 450F is the affordable high performance towed side scan sonar which produces spectacular images of the seabed. The compact hydrodynamic full body three-fin design improves stability of the sonar while its being towed which helps further improve the quality of images it produces.

StarFish 450H is the affordable high performance hull-mounted side scan sonar which produces spectacular images of the seabed.

The StarFish 452F Side Scan Sonar competes with many larger commercial systems producing spectacular images of the seabed, and includes intuitive software with a variety of data export options.

The ultimate high resolution StarFish side scan sonar for extreme image definition and target detection.

This Subsea LED Indicator light comes in four colors and provides a high pressure on/off or status indicator light.

This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.

This replacement nozzle will work for the T100 and T200. Comes with four replacement screws.

A set of spare T100 propellers for replacement or for use on the M100 Motor. Contains one clockwise propeller and one counter-clockwise propeller.

The T100 is world’s first affordable underwater thruster designed for marine robotics and the future of ocean exploration.

A set of spare T200 propellers for replacement or for use on the M200 Motor. Contains one clockwise propeller and one counter-clockwise propeller.

The T200 is a more powerful version of the T100 Thruster. Great for powering larger ROVs, AUVs, and surface vessels.

This high-accuracy, fast-response temperature sensor comes sealed and ready to use for temperature profiling, lab measurements, and more!

The Thruster Commander makes it easy to get started with our thrusters and speed controllers. It comes with a control unit, potentiometers, knobs, cables, and terminal blocks to get thrusting quickly!

Enables more versatile mounting options for the T100 and T200 Thrusters.

Housing for Astera Helios and Titan...

Test the watertight seal on your enclosure with this vacuum plug attachment, which connects to a hand vacuum pump and inserts into the enclosure vent. Comes with O-rings and a rubber stopper for testing.

These extra probes for your SOS Leak Sensor let you get to those hard to reach places in your watertight enclosure! You can choose from extra 6″, 12″ or 6″ four headed probes for you leak detection setup.