OUR PRODUCTS

Fathom Spool

Fathom Spool

SS351 Heavy Duty, Stainless Steel Rotator

SS351 Heavy Duty, Stainless Steel Rotator

GPS Navigator

GPS Navigator

Artemis PRO System

Artemis PRO System

X010 Mini Modem Transponder Beacon

X010 Mini Modem Transponder Beacon

X110 modem Trasnponder Beacon

X110 modem Trasnponder Beacon

SS181 Compact High Output LED Light with Dimming

SS181 Compact High Output LED Light with Dimming

Camera Tilt System

Camera Tilt System

Ping Sonar Altimeter & Echosounder

The Ping sonar is a single-beam echosounder that measures distances up to 30 meters (100 feet) underwater. A 30 degree beam width, 300 meter (984 foot) depth rating, and and open-source software interface make it a powerful tool for marine robotics.

Newton Subsea Grabber

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.

GoPro mount

This 3D printed GoPro mount makes it easy to attach a GoPro or GoPro-compatible camera to your BlueROV2! The mount attaches to the front of the battery enclosure where it has the same view and lighting as the main camera.

Lumen Subsea Light – Quad

These are pre-connected (daisy-chained) sets of Lumen Subsea Lights, making easy to install four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.

Lumen Subsea Light – Pair

These are pre-connected (daisy-chained) sets of LumenSubsea Lights, making easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.

Lithium-Ion Battery ( 14.8V, 18Ah )

The Lithium-ion Battery (14.8V, 18,000Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, and fits perfectly inside a 3″ Watertight Enclosure!

GPS Navigator

The GPS Navigator is a handheld underwater computer designed to assist Search & Rescue, commercial and research divers navigate between pre-determined underwater waypoints and give them access to a GPS based position fix.

Artemis System

Artemis is a modular handheld console that can be configured as a diver target detection sonar and GPS underwater navigation aid.  

Artemis PRO System

ARTEMIS PRO is designed to assist divers navigate underwater or perform seabed surveying and location of objects on the seabed.

Newton Subsea Grabber

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.

Fathom Spool

The Fathom Spool is a rugged and easy to use spool that simplifies tether storage and management for your BlueROV2! Full IP67 water resistance, 8-wire slip-ring, and integrated quick connectors make it tough enough to use at almost any dive site while remaining easy to transport. Does not include tether! A Fathom-X Tether Interface (FXTI) topside box is required for use, as well as a tether with an installed Binder 770 connector.

Fathom Tether

This professional-grade neutrally buoyant tether combines rugged strength and durability with high-performance electrical characteristics for wide-ranging ROV and subsea applications. The new R2 version of the tether has a polyurethane jacket for improved flexibility and better adhesion to potting materials. Comes with pre-installed Binder 770 connector and cable penetrator.
No data was found

SS490 4K UHD 20X Zoom Camera

The SS490 is a 4K UHD camera that provides superior video image quality at four times the resolution of 1080 full HD images.

SS474 HD Camera

The SS474 provides exceptional image quality at HD 1080p resolution. Rated to 6000m.

SS465 High Definition Color Zoom Camera

The SS465 IP Color Camera with clear optical zoom ensures high resolution images, installation ease and immediate data storage & retrieval.

SS446 High Definition Color Zoom Camera

Sidus Solutions’ SS446 offers stunning full 1080i/720p high definition video via HD-SDI over coaxial cable.

SS429DN IP Network Camera 5MP

Sidus Solutions’ SS429-DN is a network ready IP camera system with a 1/2” CMOS sensor. Resolution options include 2, 3 and 5 megapixel versions.

SS414 “Mini Inspector” High Performance Color Camera with Integrated LED Lighting

SIDUS Solutions’ Mini Inspector unites an image rich, high clarity inspection camera with integrated, variable intensity, sealed high-bright LEDs.

SS501 Green Laser

Sidus Solutions’ SS501 is a deep water pointing and scaling device that utilizes a powerful 532nm green laser.

SS182 High Output LED Light with Dimming

Sidus Solutions’ SS182 high output LED underwater light offers the perfect illumination solution for a vast number of applications were high vibration and impact shock could be an issue or low power consumption is desired.

SS181 Compact High Output LED Light with Dimming

Sidus Solutions’ SS181 high output LED underwater light offers the perfect illumination solution for a vast number of applications.

SS174 Stainless Steel Sea Torch Light

Sidus Solutions’ SS174 Sea Torch underwater light offers the perfect illumination solution for a vast number of applications.

SS172 Sea Torch Light

Sidus Solutions’ SS172 Sea Torch underwater light offers the perfect illumination solution for a vast number of applications.

Lumen Subsea Light – Quad

These are pre-connected (daisy-chained) sets of Lumen Subsea Lights, making easy to install four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal.

Binder 770 Plug

This Binder 770 connector is our standard for tether connections above the water. Some assembly with soldering required for installation.

Binder 770 Bulkhead Connector

This Binder 770 bulkhead connector is our standard for tether connections above the water. This connector can be mounted in a spare hole on the FXTI for your custom connections.

Fathom X Tether Interface Board – Set

The Fathom-X boards provide a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.

Fathom S Tether Interface Board – Set

The Fathom-S boards provide low-latency video, a serial port connection, and remote power on/off switch for tethers of 300+m length. Use with the Fathom tether or a Cat5+ network cable.

Subsea Switch

This Switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.

Camera Tilt System

This camera tilt system provides up/down pitch tilting for a camera and attaches directly to the 4″ Series Electronics Tray. Used on the BlueROV2.

Electronic Speed Controller (ESC), 30A, R3

A simple electronic speed controller for the T100 and T200 Thrusters. This new R3 version is based on the BLHeli ESC design with upgraded features and performance!

T200 Propeller Set

A set of spare T200 propellers for replacement or for use on the M200 Motor. Contains one clockwise propeller and one counter-clockwise propeller.

T100 Propeller Set

A set of spare T100 propellers for replacement or for use on the M100 Motor. Contains one clockwise propeller and one counter-clockwise propeller.

Thruster Commander

The Thruster Commander makes it easy to get started with our thrusters and speed controllers. It comes with a control unit, potentiometers, knobs, cables, and terminal blocks to get thrusting quickly!

M200 Brushless Motor

The M200 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T200 Thruster.

M100 Brushless Motor

The M100 is a rugged brushless motor for use in the ocean and in extreme environments. It has the same internal components as the T100 Thruster.

4″ End Cap – Aluminium -18 Holes

This 18-hole aluminum end cap is compatible with the 4″ Series Watertight Enclosure. It can be used with the BlueROV2 and adds four additional cable penetrations for more expandability!

ISP2 Subsea Housing

ISP2 is ideal for use as an instrumentation housing, control or battery pod.

ISP1 Subsea Housing

Provided with bespoke end caps the ISP1 is ideal for use as an instrumentation housing, control or battery pod.

4″ Enclosure Clamp

The Enclosure Clamp (4″ Series) clamps around a 4″ Watertight Enclosure for easy mounting on your vehicle.

4″ O-Ring Spare Set

A spare set of O-rings for replacement or for use on 4″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

4″ O-Ring Flange

This flange has a double O-ring seal that fits the tube for the 4″ Series Water Tight Enclosure. Comes with O-rings.

SS352 heavy Duty, Titanium Rotator

SS352 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

SS351 Heavy Duty, Stainless Steel Rotator

SS351 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

SS350 Heavy Duty Rotator

SS350 deepwater rotator assembly is a powerful robotic positioning device. Within a small footprint, you are now able to position heavy loads with ease and high accuracy.

SS320 Titanium Rotator

The Sidus SS320 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

SS310 Stainless Steel Rotator

The Sidus SS310 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

SS309 Rotator Device

The Sidus SS309 underwater rotator assembly is designed in a modular configuration and uses high quality precision ball bearings, low backlash gear drives and motors.

Reach 5 Mini

The Reach 5 Mini is a leap in miniature subsea manipulation technology. It builds on the modularity of the RS1 series to create a highly durable and light weight manipulator, capable of performing dexterous subsea tasks.

RS1-2120 Pan & Tilt

The combination of our rotate and bend stage creates a highly capable, ultra compact pan tilt actuator RS1-2120. Configured with sonar, camera and/or lights this device allows for exact output orientations or angular sweeps to be demanded making it a useful tool for search and survey operations.

RS1-2130 Rotating Grabber

The combination of our rotate and linear stage creates an ultra compact dual function actuator RS1-2130. Configured with jaws this device turns into a highly capable dual function grabber.

RS1-1300 Grabber

RS1-1300 is a miniature subsea linear actuator. Attached to jaws this device turns into a highly capable grabber, cutter or sampler. When compared the dual function grabber this option is slightly smaller, lighter and available at a lower price point.

RS1-1200 90-Deg Rotate

RS1-1200 is a miniature bend actuator. Capable of high torque it can be used for a variety of tasks including rotating winches, panning heavy cameras or operating valves. Compliance on the bend stage can be activated to provide self protection against accidental impact.

RS1-1100 In Line Rotate

RS1-1100 is a miniature rotate actuator. Capable of continuous rotation it can be used for a variety of tasks including sonar/video scanning and vectoring thrustors. Compliance on the rotate stage can be activated to provide self protection against accidental impact.

ISFMD Flood Member Detector

The ISFMD system provides the latest in underwater ultrasonic Flooded Member Detection technology. Suitable for Diver or ROV deployment the ISFMD system provides the most advanced and reliable Flooded Member Detection system available today.

ISM3D AHRS, 4000m

The ISM3D is a highly accurate underwater Attitude & Heading Reference System.  

ISD400 Depth & Temp Sensor, 4000m

The ISD4000 is a compact, survey grade Depth & Temperature Sensor. Optionally, the unit can also be provided with an integrated Attitude and Heading Reference System (AHRS).  This provides highly stable Heading, Pitch and Roll readings.

ISA500 Altimeter & Echo Sounder, 4000m

The ISA500 underwater Altimeter & Echo Sounder provides exceptionally long range measurement capability – in excess of 120 meters.  In addition to providing exceptionally long range capability, the unit has a 1mm accuracy – allowing precision underwater distance measurements to be made.  

Ping Sonar Altimeter & Echosounder

The Ping sonar is a single-beam echosounder that measures distances up to 30 meters (100 feet) underwater. A 30 degree beam width, 300 meter (984 foot) depth rating, and and open-source software interface make it a powerful tool for marine robotics.

Bar100 Depth & Temp Sensor, 1000m, ±3cm

This pressure sensor can measure up to 100 Bar (1000m depth) with a depth resolution of 3 cm. It is waterproof and ready to install