Enclosures 

2″ Acrylic End Cap – Blank

This end cap is for use on the 2″ Series Watertight Enclosure.

2″ Aluminium End Cap – 2 holes

This aluminium end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.

2″ Aluminium End Cap – Blank

This aluminium end cap is for use on the 2″ Series Watertight Enclosure.

2″ Dome End Cap

Dome end cap for use on Watertight Enclosure for ROV/AUV (2″ Series).

2″ O-Ring Flange

This flange has O-ring seals that fit the tube for the 2″ Series Watertight Enclosure. Comes with O-rings.

2″ O-Ring Spare Set

A spare set of O-rings for replacement or for use on O-Ring Flange (2″ Series). Contains one face O-ring and two radial O-ring.

2″ Tube – Acrylic

This optically clear, cast acrylic tube is for use with the 2″ Series Watertight Enclosure.

2″ Tube – Aluminium

This aluminum tube is for use with the 2″ Series Watertight Enclosure.

3″ Enclosure Clamp Set

The Enclosure Clamp (3″ Series) clamps around a 3″ Watertight Enclosure for easy mounting on your vehicle.

3″ End Cap – Aluminium – 4 holes

This aluminum end cap with 4 holes is for use on the 3″ Series Watertight Enclosure.

3″ End Cap – Aluminium – 7 holes

This aluminium end cap with 7 holes is for use on the 3″ Series Watertight Enclosure.

3″ End Cap – Aluminium – Blank

This aluminum end cap is for use on the 3″ Series Watertight Enclosure.

3″ End Cap – Dome

Dome end cap for use on Watertight Enclosure for ROV/AUV (3″ Series).

3″ O-Ring Flange

This flange with an O-ring seal fits the tube for the 3″ Watertight Enclosure. Comes with O-rings.

3″ O-Ring Spare Set

This spare set of O-rings is for replacement or for use on 3″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

3″ Tube – Acrylic – 222mm Length

This cast acrylic, optically clear tube is for use with 3″ Series Watertight Enclosure.

3″ Tube – Aluminium – 222mm Length

This aluminium tube for the 3″ Series enclosure has an increased 500m (1,640 ft) depth rating and hard anodized finish.

4″ Enclosure Clamp

The Enclosure Clamp (4″ Series) clamps around a 4″ Watertight Enclosure for easy mounting on your vehicle.

4″ End Cap – Aluminium – 10 holes

This aluminum end cap with 10 holes is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium – 14 holes

This aluminium end cap with 14 holes is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium – 5 holes

This aluminium end cap with 5 holes is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium – Blank

This aluminium end cap is for use on the 4″ Series Watertight Enclosure.

4″ End Cap – Aluminium -18 Holes

This 18-hole aluminum end cap is compatible with the 4″ Series Watertight Enclosure. It can be used with the BlueROV2 and adds four additional cable penetrations for more expandability!

4″ End Cap – Dome

Dome end cap for use on Watertight Enclosure for ROV/AUV (4″ Series).

4″ O-Ring Flange

This flange has a double O-ring seal that fits the tube for the 4″ Series Water Tight Enclosure. Comes with O-rings.

4″ O-Ring Spare Set

A spare set of O-rings for replacement or for use on 4″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.

4″ Tube – Acrylic – 298mm Length

This optically clear, cast acrylic tube for use with the 4″ Series Watertight Enclosure.

4″ Tube – Aluminium – 298mm Length

This aluminium tube for the 4″ Series enclosure has an increased 400m (1,312 ft) depth rating and hard anodized finish.

Enclosure Vent & Plug

This vent allows trapped pressure to escape from an enclosure after it has been closed. Based on the cable penetrator design, it includes a threaded plug with double O-ring seal to open and close the vent.

ISP1 Subsea Housing

Provided with bespoke end caps the ISP1 is ideal for use as an instrumentation housing, control or battery pod.

ISP2 Subsea Housing

ISP2 is ideal for use as an instrumentation housing, control or battery pod.

Vacuum Plug

Test the watertight seal on your enclosure with this vacuum plug attachment, which connects to a hand vacuum pump and inserts into the enclosure vent. Comes with O-rings and a rubber stopper for testing.